Jun 08, 2026Leave a message

How to choose and install angle pins?

When it comes to mold hardware, angle pins play a crucial role in the operation of molds. As a mold hardware supplier, I understand the importance of choosing and installing angle pins correctly. In this blog post, I will share some insights on how to select and install angle pins effectively.

Understanding Angle Pins

Angle pins, also known as lifter pins, are used in injection molds to create undercuts or side actions. They are typically made of high - strength steel and are designed to move at an angle during the mold opening and closing process. The angle of the pin determines the direction and distance of the side action.

Mold Ejector PinMold Guide Sleeve

Choosing the Right Angle Pins

Material

The material of the angle pin is a critical factor. High - carbon alloy steels are commonly used due to their excellent hardness, wear resistance, and toughness. For example, materials like SKD61 or H13 are popular choices. These steels can withstand the high pressures and frictional forces during the molding process.

Size and Dimensions

The size of the angle pin should be selected based on the requirements of the mold. Consider the length, diameter, and the angle of the pin. The length should be sufficient to provide the necessary side action distance, while the diameter should be large enough to handle the forces without bending or breaking. The angle of the pin is determined by the undercut design of the part. A common angle range is between 10° and 25°.

Surface Finish

A smooth surface finish is essential for angle pins. A rough surface can cause increased friction, which may lead to premature wear and tear. A polished surface reduces friction and ensures smooth movement of the pin during the mold operation.

Compatibility with Other Mold Components

Angle pins need to be compatible with other mold components such as Mold Guide Sleeve, Mold Guide Pins, and Mold Ejector Pin. They should fit properly in the guide sleeves and work in harmony with the ejector system.

Installation of Angle Pins

Pre - installation Checks

Before installing the angle pins, it is important to perform a series of checks. First, inspect the angle pins for any defects such as cracks, burrs, or improper machining. Check the guide sleeves to ensure they are clean and free of debris. Measure the dimensions of the angle pins and the guide sleeves to ensure a proper fit.

Mounting the Angle Pins

  1. Positioning: Determine the correct position of the angle pins in the mold. This is based on the undercut design of the part. Mark the locations on the mold plates accurately.
  2. Drilling and Tapping: Drill holes in the mold plates according to the dimensions of the angle pins. The holes should be straight and have the correct diameter. Tap the holes if necessary to create threads for the angle pins.
  3. Insertion: Carefully insert the angle pins into the holes. Make sure they fit snugly and are perpendicular to the mold plate. Use a hammer or a press to seat the pins properly if needed.
  4. Alignment: Check the alignment of the angle pins with the guide sleeves. The pins should move smoothly in and out of the sleeves without any binding. Adjust the position of the pins if necessary.

Testing the Installation

After installation, perform a test run of the mold. Open and close the mold several times to ensure that the angle pins are functioning correctly. Check for any abnormal noises, binding, or excessive wear. If any issues are detected, make the necessary adjustments.

Maintenance of Angle Pins

Regular maintenance of angle pins is essential to ensure their long - term performance. Clean the angle pins and guide sleeves regularly to remove any debris or contaminants. Lubricate the pins with a suitable lubricant to reduce friction. Inspect the pins for wear and tear periodically and replace them if necessary.

Conclusion

Choosing and installing angle pins correctly is crucial for the successful operation of injection molds. By selecting the right material, size, and finish, and following the proper installation and maintenance procedures, you can ensure that your angle pins perform optimally. As a mold hardware supplier, we are committed to providing high - quality angle pins and other mold hardware components. If you are interested in purchasing angle pins or other mold hardware, please feel free to contact us for more information and to discuss your specific requirements.

References

  • "Mold Design Handbook", various authors
  • Industry standards and guidelines for mold hardware manufacturing

Send Inquiry

Home

Phone

E-mail

Inquiry