Oct 15, 2025 Leave a message

What Types Of Mold Ejectors Are There?

Ejectors are plastic mold accessories used within plastic molds. They can also be called push rods, insert pins, center pins, and support pins. Sometimes, the top pin used on a lathe is also called an ejector pin. Uses of ejectors:

 

1. In plastic molds, they are most commonly used to remove the product from the mold.

 

2. Carbide ejectors, such as tungsten carbide ejectors, can be used to drill longer and thinner holes.

 

3. Ejectors, also called top pins, are conical metal rods with conical heads that are mounted on lathes or grinders to support and rotate the workpiece. However, they are completely different from the ejector pins used in plastic mold accessories.

 

4. Plastic mold ejectors can also be used inside the mold to stabilize the mold and are called insert pins.

 

Types of plastic mold ejectors include flat ejectors, round ejectors, support pins, standard ejectors, and non-standard ejectors. Plastic mold ejector pins are made of materials such as SKH51, SKD61, SKD11, and 65Mn. SKH51 ejector pins are tougher than SKD61 pins; SKD61 pins can withstand temperatures up to 1600°C. Nitriding the surface of SKD61 ejector pins significantly improves their wear resistance. 65Mn ejector pins are of lower quality and are brittle and prone to breakage. Therefore, most plastic molds no longer use 65Mn ejector pins.

Send Inquiry

Home

Phone

E-mail

Inquiry