Jan 15, 2026Leave a message

What are the materials for angle pins?

Angle pins, also known as lifter pins, are essential components in mold hardware. They play a crucial role in the operation of molds, particularly in injection molding and die - casting processes. As a mold hardware supplier, I understand the importance of selecting the right materials for angle pins. In this blog, I will discuss the various materials used for angle pins, their properties, and their applications.

Common Materials for Angle Pins

1. Tool Steel

  • High - Speed Steel (HSS)
    High - speed steel is a popular choice for angle pins. It contains high amounts of alloying elements such as tungsten, molybdenum, chromium, and vanadium. These elements give HSS excellent hardness, wear resistance, and heat resistance. For example, M2 high - speed steel can retain its hardness even at elevated temperatures, which is crucial as angle pins often operate in high - temperature environments during the molding process. The high wear resistance ensures that the angle pins can withstand the repeated friction and motion within the mold without significant degradation. High - speed steel is suitable for molds where high - precision and long - term durability are required. For molds that produce large quantities of parts, HSS angle pins can maintain their shape and performance over time, reducing the need for frequent replacements.
  • Oil - Quenched Tool Steel (O1)
    O1 tool steel is another widely used material. It is known for its good machinability, high hardness, and moderate toughness. The oil - quenching process gives O1 steel a fine - grained structure, which contributes to its excellent wear resistance. Compared to HSS, O1 tool steel is more cost - effective, making it a popular choice for general - purpose molds. However, its heat resistance is lower than that of HSS. So, it is more suitable for molds that operate at relatively lower temperatures. Many small - to - medium - sized mold manufacturers prefer O1 tool steel for angle pins in their standard molds, as it provides a good balance between performance and cost.

2. Stainless Steel

  • Martensitic Stainless Steel (e.g., 420)
    Martensitic stainless steel, such as 420, is corrosion - resistant and has good hardness. In mold applications where the molding material may be corrosive or the mold operates in a humid environment, 420 stainless steel angle pins are a great choice. The hardening process can further enhance its hardness and wear resistance. For example, in the food packaging industry, where molds come into contact with food - grade plastics and moisture, 420 stainless steel angle pins prevent rust and ensure the cleanliness and quality of the molded parts. The high strength and toughness of 420 stainless steel also make it suitable for withstanding the mechanical stresses during the molding process.
  • Precipitation - Hardening Stainless Steel (e.g., 17 - 4PH)
    17 - 4PH stainless steel offers a unique combination of high strength, good corrosion resistance, and excellent machinability. It can be heat - treated to achieve different levels of hardness and toughness. This material is often used in high - performance molds where precision and reliability are critical. In aerospace and medical device manufacturing, where the molds produce parts with strict dimensional tolerances and high surface finishes, 17 - 4PH stainless steel angle pins provide the necessary stability and performance.

3. Carbide

Tungsten carbide is an extremely hard and wear - resistant material. It has a high density and excellent thermal conductivity. Angle pins made of tungsten carbide are suitable for molds that require high precision and long - lasting performance. In the electronics industry, where small and delicate parts are molded, carbide angle pins can ensure accurate molding and reduce the formation of burrs on the molded parts. However, carbide is more brittle than steel, so the design and handling of carbide angle pins need to be carefully considered. Special manufacturing processes are required to produce carbide angle pins, which also makes them more expensive compared to steel angle pins.

Material Selection Factors

1. Mold Type and Application

The type of mold and its application are the primary factors in material selection. For injection molds used in mass - producing consumer products, such as plastic toys, O1 tool steel angle pins may be sufficient due to the relatively low - cost requirements and moderate operating conditions. On the other hand, for molds used in the automotive industry, where high - precision and high - strength parts are produced, high - speed steel or carbide angle pins may be more appropriate.

2. Operating Conditions

The temperature, pressure, and corrosion environment within the mold are crucial factors. High - temperature molds, such as those used in die - casting aluminum alloys, require angle pins with good heat resistance, like HSS. In corrosive environments, stainless steel angle pins are the best option to prevent rust and maintain the mold's performance.

3. Cost

Cost is always a consideration in the manufacturing industry. While carbide and high - end stainless steels offer excellent performance, they are more expensive. Small - scale mold manufacturers or those with cost - sensitive projects may opt for more economical options like O1 tool steel.

Mold Guide PinsMold Ejector Pin

Our Product Range and Related Links

As a mold hardware supplier, we offer a wide range of angle pins made from different materials to meet the diverse needs of our customers. In addition to angle pins, we also provide other essential mold hardware products, such as Mold Die Punch, Mold Guide Pins, and Mold Ejector Pin. Our products are manufactured with high - quality standards to ensure their reliability and performance.

Contact Us for Procurement

If you are in the market for high - quality angle pins or other mold hardware products, we encourage you to contact us for procurement. We have a team of experts who can assist you in selecting the right materials and products for your specific mold applications. Our goal is to provide you with the best - in - class solutions at competitive prices. Whether you are a small - scale mold maker or a large - scale manufacturing company, we are committed to meeting your needs.

References

  • "Tool and Die Making Handbook", American Society for Metals (ASM)
  • "Stainless Steel: Properties, Processing, Applications", CRC Press
  • "Carbide and Cermet Materials: Properties, Processing, and Applications", Woodhead Publishing

Send Inquiry

Home

Phone

E-mail

Inquiry